Advertisement
n Panel
App Settings
Default App
Usually "Slideshow" should be used.
Select "e-Signage S Player A1" when distributing with e-Signage S (optional).
Check the e-Signage S manual regarding e-Signage S.
Network Settings
Bluetooth
Use Bluetooth............. Set whether or not to use Bluetooth.
This setting will be set to off approx. 30 minutes after it is applied to the monitor.
Wireless LAN
Use Wireless LAN ...... Set whether or not to use a wireless LAN.
AP Connect setting .... To use a wireless LAN, set "SSID", "Security" and "Password" according to the access point.
DHCP ......................... Set whether or not to automatically acquire the address from the DHCP server.
IP Address .................. Set the monitor IP address when not using the DHCP server.
Gateway ..................... Set the gateway when not using the DHCP server.
Subnet mask .............. Set the Subnet mask when not using the DHCP server.
DNS............................ Set the DNS server address when not using the DHCP server.
Security Settings
Key Lock
When this option is set to on, buttons other than the power button cannot be operated.
Indicator during Key Lock:
- It will flash blue (2 seconds on, 1 second off) in Manual Mode.
- It will flash green (2 seconds on, 1 second off) in Automatic Mode.
Prohibit importing from USB flash device
When this option is set to on, prohibit changes to the display image or settings using a USB flash drive.
System Settings
Languages (言語 , Sparchen, Langues, Idiomas)
Set the display language for the monitor.
Date and Time
Use network time ....... Set whether not to set the date and time automatically from the network.
Date............................ The date will be set if "Use network time" is set to off.
Time ........................... The time will be set if "Use network time" is set to off.
Timezone ................... Set the timezone.
Receive
Load the settings to this software.
USB flash ................... The settings saved on the USB flash drive will be loaded.
EP-device ................... Load the settings from the monitor connected with the USB cable.
Folder ......................... Load the settings file saved in any location.
Send
Export the settings of this software.
USB flash ................... Save the settings to a USB flash drive.
The settings will be applied to the monitor when the USB flash drive is connected to the monitor.
EP-device ................... Apply the settings to the monitor connected with the USB cable.
Folder ......................... Save the settings in any location.
Reset
Return the setting for "Panel" to the initial value.
n Status
Show the monitor (settings file) status.
7
E
Advertisement
