Advertisement
n e-Signage S Player A1
Set e-Signage S Player A1 settings when the "Default App" is set to "e-Signage S Player A1".
Images can be distributed to the monitor with e-Signage S (optional). Check the e-Signage S manual regarding e-Signage S.
Check the e-Signage S manual regarding "Player setting", "Network Settings", and "Player Device control settings".
Receive
Load the settings to this software.
USB flash ................... The settings saved on the USB flash drive will be loaded.
EP-device ................... Load the settings from the monitor connected with the USB cable.
Folder ......................... Load the settings file saved in any location.
Send
Export the settings of this software.
USB flash ................... Save the settings to a USB flash drive.
EP-device ................... Apply the settings to the monitor connected with the USB cable.
Folder ......................... Save the settings in any location.
Reset
Return the setting for "e-Signage S Player A1" to the initial value.
n Setting tool
Application Settings
Show startup window
Set whether or not to display the startup window.
Use encryption key
This option is set to on to encrypt data that is exported to the monitor.
If this option is set to on, the encryption key entry screen will be displayed when write out.
Enter the encryption key that is set for the monitor. If the entered encryption key is different from the encryption key set on
the monitor, the settings will not be applied.
Set the monitor encryption key in "New Encryption Key" when using it for the first time.
All Reset
Return the setting for "Slideshow", "Panel" and "e-Signage S Player A1" to the initial value.
When the reset is complete, the indicator lit blue and the screen becomes white.
*Carry out an "All Reset" after performing the following operations if distributing with e-Signage S (optional).
(1) Set "Default App" of "App Settings" in "Panel" to "Slideshow".
(2) Apply the settings to the monitor.
(3) Turn off/on the power for the monitor.
Languages (言語 , Sparchen, Langues, Idiomas)
Set the display language for this software.
Version
Display this software version.
8
E
The settings will be applied to the monitor when the USB flash drive is connected to the monitor.
Advertisement
