Advertisement
User instructions
4 Operating instructions
After having installed the dishwasher, remove the basket retainers and
prepare the machine for use as follows:
Regulate the water softening system;
Add regenerating salt;
Add rinse aid and detergent.
4.1
Setting the water hardness
The dishwasher must be switched on and the door open.
Press and hold the cycle delay button until "h" appears on the
display followed by the current setting (e.g. h3).
Press the cycle delay button once or several times to select the
required hardness (from h0 to h5).
After carrying out the adjustment or displaying the current setting, if you
do not touch the button for a few seconds the dishwasher will
automatically exit from adjustment mode and return to the standard
operating mode.
WATER HARDNESS TABLE
WATER HARDNESS
German degrees (°dH)
0 - 6
7 - 10
11 - 15
16 - 21
22 - 28
29 - 50
Contact your local water board for information on the hardness of your
water supply. Default settings: h3 - 16-21°dH – 28-37°dF
French degrees (°dF)
0 - 11
12 - 18
19 - 27
28 - 37
38 - 50
51 - 90
SETTING
h.-0 NO SALT
h.-1
h.-2
h.-3
h.-4
h.-5
30
Advertisement
Troubleshooting
