Advertisement
LANGUAGE SELECTION
1-Switch on the dishwasher
2-Select a wash program (not Special)
3-Press and hold the "special" button until the currently selected language
appears on the front display.
Press the button again to scroll through the available languages. When the
required language appears on the display, select it by simply waiting a few
seconds without selecting any other options (the name of the chosen
language appears on the display) or switch off the dishwasher by pressing
the on/off button.
CYCLE COUNTING (on some models only)
This function allows you to view the total number of cycles carried out since installation.
Press the
button for 3 seconds to display the two screens that show the number of
cycles carried out by the machine.
A: thousands B: hundreds C: tens D: units
ABCD: total number of wash cycles carried out
N.B.:
-
With the door open, the display switches off after about 10 seconds with
no commands.
-
With the door closed, if the dishwasher is programmed but the start is not
confirmed (cycle not confirmed, program interrupted, start not confirmed...)
the name smeg appears on the display after about 10 seconds.
WASH PROGRAM SELECTION AND SWITCHING-ON
For selection of the most suitable program for the dishes to be washed,
refer to the table below, which specifies the recommended type of wash,
also considering the type of dishes and the degree of soiling.
User instructions
22
Advertisement
Troubleshooting
