Advertisement
User instructions
4.2 Adding the salt
The amount of scale contained in the water
(water hardness index) can cause whitish
staining on the dry dishes, which tend to
become dull over time. The dishwasher is
equipped with an automatic softening
system which uses a special regenerating
salt to reduce the hardness of the water.
When using water of medium hardness, the regenerating salt container
should be refilled after approximately 20 washing cycles. The salt
container can hold approximately 1 kg of salt in grains. Some models are
equipped with an optical no-salt indicator. In these models, the cap of the
salt container contains a green float which descends as the salt
concentration in the water drops. When the green float can no longer be
seen through the transparent cap, the container must be topped up with
regenerating salt. The container is situated at the bottom of the
dishwasher.
The salt prevents the formation of scale deposits.
Remove the lower basket.
Unscrew the cap of the salt container
by turning it anticlockwise.
When using the dishwasher for the
first time, fill the container with a litre
of water.
Pour salt (approx. 1 kg) into the
container using the funnel provided with the dishwasher.
When finished, remove any salt residues before screwing the cap
back on.
SALT
SALT
31
Advertisement
Troubleshooting
