ICON Health & Fitness PRO-FORM 10 K Cooling Breeze User Manual page 7

With the help of a second person, raise the treadmill

Frame (55), Hold the Latch Housing (68) and the Latch

Housing Cover (5) against the sides of the Frame as

shown, Loosely thread the two bluntqpped

1/2" Screws

(105) into the Latch Housing Cover and the Latch Housing

as shown, Do not tighten

the Screws yet,

Remove the knob from the pin, Make sure that the collar

and the spring are on the pin, The collar should be on the

indicated side of the spring, insert the pin into the Latch

Housing (68), and tighten the knob back onto it,

Align the pin with the hob in the Left Handgrip (63) by slido

ing the Latch Housing (68) up or down, Make sure that the

pin can be inserted fully into the hob, Hold the Latch

Housing in place as you tighten the two 1/2" Tek Screws

(20) into the Latch Housing and the Frame (55), Then,

tighten the 1/2" Screws (105), Note: it may be necessary

to pull on the knob to access and tighten the Screws,

Spring

Console

Assembly

Knob

Hobs

Remove the backing from the indicated tape on the console

assembly, Press the Book Holder (23) firmly onto the tape,

5, Make sure that aH parts are properly

tightened

before you use the treadmill.

Ptace a mat beneath the

treadmill

to protect

the floor or carpet. For your benefit, we recommend that you familiarize yourself with

the TROUBLESHOOTING

section on pages 27 and 28,

Dtl92941