ICON Health & Fitness PRO-FORM 10 K Cooling Breeze User Manual page 28

PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page
8.
b.
if the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to rift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Hug in the power cord, in-
sert the key, and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
Rear Roller Adjustment Bolts
c. if the walking belt still slows when walked on, please call our Customer Service Department.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a, if the walking
belt is off-center, first remove the key
and UNPLUG THE POWER CORD. if the walking
beJt has sMfted to the left, use the allen wrench to
turn the bft rear roller boutclockwise 1/2 of a turn; if
the waJking belt has shifted to the right, turn the
left bolt counterclockwise 1/2 of a turn. Be careful not
to overtighten the walking belt. Hug in the power
cord, insert the key, and run the treadmill for a few
minutes. Repeat until the walking belt is centered.
b.
if the waJking beJt sJips when waJked on, first re-
move the key and UNPLUG THE POWER CORD.
Using the alien wrench, turn both rear roller bolts
clockwise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to rift each side of
the walking belt 3 to 4 inches off the walking platform.
Be careful to keep the walking belt centered. Hug in
the power cord, insert the key, and carefully walk on
the treadmill for a few minutes. Repeat until the walk-
ing belt is properly tightened.
28