ETEKCITY EL19 - Digital Luggage Scale Manual
Package Contents
1 x Digital Luggage Scale
1 x 3V CR2032 Battery (Pre-Installed)
1 x User Manual
Specifications
Weight Capacity | 110 lb / 50 kg |
Units | oz / kg / g / lb |
Graduation | 0.35 oz / 10 g |
Battery | 1 x 3V CR2032 Battery (Lithium) |
Dimensions | 5.7 x 1.4 x 1.2 in / 145 x 35 x 30 mm |
Auto-Off | 60 seconds |
Follow all instructions and safety guidelines. Read all instructions before using.
- Do not exceed 110 lb / 50 kg, including the tared weight of the container. The display will read " " if the weight exceeds the limit.
- This scale is not intended for commercial or heavy-duty use. Household use only.
- Do not throw or strike the scale and do not submerge the scale in water.
SAVE THESE INSTRUCTIONS
Function Diagram
- Display
- Power Button
- Scale Body
- Battery Compartment
- Triangle Ring
- Belt
- Hook
Before First Use
- Open the battery cover. If necessary, use a tool to open.
- Remove the insulation strip from thebattery.
- When replacing the battery, make sure the + side of the battery is facing up.
- Replace the battery cover.
General Operation
Weight Measurement
- Press to turn on the scale. Wait for " " to appear on the display.
- Wrap the belt around the handle of your luggage and place the hook on the bottom of the triangle ring.
- Lift the luggage with the scale and hold still until the weight measurement stabilizes. The display will show the weight and " " (Data Hold).
Note: Do not move the scale during measurement. - To measure another item, remove the luggage and repeat steps 2 and 3.
- Press and hold for 3 seconds to turn the scale off.
Data Hold Function
Once the weight has stabilized and " " appears on the display, the weight will stay on the screen for 60 seconds, or until you measure another object. You can also press to reset the display.
Unit Conversion
- Press to turn the scale on.
- Before the display reads " ", press repeatedly to switch between grams (g), pounds (lb), ounces (oz), and kilograms (kg).
Tare Function
You can use the Tare function to weigh an object inside a container by subtracting the weight of the container from the total weight.
- Press to turn on the scale. Make sure the display reads " ".
- Wrap the belt around the handle of the container and place the hook on the bottom of the triangle ring. Allow the weight to stabilize until " " appears on the display.
- Hold the scale stable and press to tare. The display will show " ".
- Place the item you want to weigh inside the container. The scale will measure the contents without including the weight of the container.
Care & Maintenance
- Do not immerse the scale in water or use chemical detergents to clean the scale.
- Use a damp cloth to wipe the scale clean.
- Do not place stress on the triangle ring when not using the scale.
Replacing the Batteries
When the display reads " ", battery power is low. Replace the battery.
- Turn the scale over and open the battery compartment.
- Remove the used battery and replace it with 1 new 3V CR2032 battery.
Make sure the + side of the battery is facing up. - Replace the battery compartment cover.
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download ETEKCITY EL19 - Digital Luggage Scale Manual
Need Assistance?
Do you have a question about the EL19 that isn't answered in the manual? Leave your question here.