Etekcity ESN00 Series - Smart Nutrition Scale Manual

Package Contents

1 x Smart Nutrition Scale
3 x 1.5V AAA Batteries (Pre-Installed)
1 x Quick Start Guide

Specifications

Note: To access additional smart nutrition scale functions, download the free VeSync app.

Function Diagram

1. Weighing Platform
2. Digital Display
3. Unit Switching Button
4. Power/Tare Button
5. Battery Compartment
6. Anti-Skid Pads

Digital Display

1. Bluetooth^® Icon
2. Battery Life Indicator
3. Weighing Mode
4. Measurement Unit
5. Tare Mode
6. Negative Weight Value
7. Weight Value
8. Nutritional Information

Setup

1. Open the battery compartment on the underside of the scale.
2. If necessary, insert the included AAA batteries, making sure they are under the correct polarity as marked in the battery compartment.
   
3. Replace the battery cover.
4. Press to turn on the scale.

VeSync App Setup

Note: Due to app updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in app instructions.

1. To download the VeSync app, scan the QR code or search "VeSync" in the Apple App Store^® or Google Play Store.
   

Note:

• This scale uses the VeSync app, not the VeSyncFit app.
• For Android™ users, choose "Allow" (when prompted) to use VeSync.

2. Open the VeSync app. If you already have an account, tap Log In. To create a new account, tap Sign Up.
   Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest account. With a VeSync account, you can also allow your family or friends to use your nutrition scale. Even if you get a new phone, your nutrition records will still be available on your account.
3. Tap + in the VeSync app and select your smart nutrition scale.
4. Follow the in-app instructions to connect your phone to your smart nutrition scale.

Note: You can change the name and icon at any time in the smart nutrition scale settings.

Scale Operation

Tips

• For accurate results, always place the scale on a hard, dry, flat surface, and keep the scale away from dirt, dust, vibration, wind, air currents, and electromagnetic interference.
• When you turn on the scale, choose units, or use the Tare function, always wait for the scale to read "0" before attempting measurement.
• To see nutrition information besides weight or volume, or to record food in the app, you must connect the scale to the VeSync app.

Measurement

1. Press to turn on the scale. Press UNIT to select your desired measuring unit, which will show at the top of the display. [Figure 2.1] You can also change the measurement unit in the VeSync app.
   
   1. Weight: Choose between ounces ("oz"), both pounds and ounces ("lb: oz"), or grams ("g").
   2. Volume: Scale measures in milliliters ("ml"). Select water (droplet image) or milk ("m" droplet image) options.
2. Optional: If you're using a container to hold the items or liquid you're measuring, first place the empty container on the scale. Press to zero out (tare) the container's weight (see Tare Function).
3. Gently place your item on the scale. The display will show the weight or volume. [Figure 2.2] If your smart scale is connected to the VeSync app, the weight will be synchronized with the VeSync app.
   
4. Press and hold for 3 seconds to turn off the scale.
   Note:
   • To reset the scale, remove all weight from the platform and press .
   • To conserve battery power, the scale will automatically turn off after 2 minutes of inactivity. The display backlight will automatically turn off after 30 seconds of inactivity. You can change this in the VeSync app.

Tare Function

Whenever you measure liquid or items inside a container, you can use the Tare function to remove the container's weight from the final measurement.

1. Place an empty container on the scale. The display will show the container's weight.
   
2. Press . The display will show "0" again.
   
3. Place liquid or items in the container. The scale will now measure the liquid or items, without including the weight of the container.
   
4. When you're done, reset the scale by removing all weight and pressing .

Maintenance

• Use a slightly damp cloth to clean the surface of the scale, followed by a dry, soft cloth to wipe away the remaining moisture.
• You can use a dry, soft cloth to wipe dust off the scale.
• Do not wash the scale or immerse it in water or any other liquid.

Troubleshooting

Problem	Possible Solution
LCD display is dim.	Scale may be on standby. Place an item on the scale for measurement, or turn off the scale by pressing and holding for 3 seconds.
	Replace the batteries.
LCD display shows "Lo".	Battery is low. Replace the batteries.
Scale does not turn on.	Replace the batteries.
	Insert batteries under the correct polarity as marked in the battery compartment.
Scale cannot connect to the VeSync app.	Make sure your mobile device is within 30 ft / 10 m of the scale.
	Some Bluetooth devices can only exchange data with 1 other Bluetooth device at a time. Make sure the scale is not currently connected to any other phone or app.
Display shows "Err".	Weight exceeds 176.4 oz / 11 lb / 5000 g / 5000 mL. Promptly remove item from scale to protect its weight sensors. Use a different scale with a higher weight range.

Note: If you still need help, please contact Customer Support.

Safety Information

To avoid damage to this scale, please read and follow all instructions and safety guidelines in this manual.

Scale

• Do not exceed the 11 lb / 5 kg weight capacity, as doing so may damage the scale. An overload indicator will appear on the LCD display if the limit is exceeded.
• Smart scales are not waterproof. Do not immerse the scale in water or any liquid. If liquid is spilled on the digital display or buttons, immediately wipe the scale clean with a soft cloth to avoid internal damage.
• Handle with care. This scale is not intended for commercial or heavy-duty use.
• Keep the scale in a cool, dry place. Avoid exposing to damp environments or extreme temperatures.
• Household use only.

Batteries

• Do not mix new and old batteries.
• If the low battery indicator ("Lo") appears on the display, replace the batteries.
• If the scale is not in use for an extended period of time, remove the batteries to conserve battery life and extend the lifetime of the scale.

Customer Support

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Email: support@etekcity.com
Toll-Free: (855) 686-3835
Support Hours
Mon–Fri, 9:00 am–5:00 pm PST/PDT
*Please have your order invoice and order ID ready before contacting Customer Support.

Connect with us @Etekcity