Table of Contents
Advertisement
Master/Slave Connectivity
The Master/Slave mode allows a Colorado 2 Quad Zoom (the master) to control one or more
Colorado 2 Quad Zoom products (the slaves) without a DMX controller. One Colorado 2 Quad Zoom
becomes the master when running an auto or custom program, or by being in a Static mode.
Each slave's control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
•
The
Operation
the master and slaves.
•
For more information about DMX standards or the DMX cables needed to link this product
to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Mount the product on a structure or surface that can support the product's weight.
See
(Technical
Specifications).
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
10
section of this manual provides detailed instructions on how to configure
Colorado 2 Quad Zoom User Manual Rev. 5
Setup
Safety Notes
Advertisement
Table of Contents
