Table of Contents
Advertisement
Setup
Master/Slave Connectivity
The Master/Slave mode allows a COLORdash Batten H12X IP (the master) to control one or more
COLORdash Batten H12X IP products (the slaves) without a DMX controller. One
COLORdash Batten H12X IP becomes the master when running an auto program or by being in Static mode.
Each slave's control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
The
Operation
the master and slaves.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
For Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure or surface onto which the product is being mounted can support the
product's weight. See the
•
Always use a safety cable when mounting the product overhead. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
Use a mounting clamp of appropriate weight capacity when rigging the product onto a truss.
Procedure
The COLORdash Batten H12X IP comes with mounting brackets that can be attached to a mounting
clamp for hanging or simply used as a floor stand. Mounting clamps are sold separately. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the Chauvet Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
Overhead mounting
COLORdash Batten H12X IP User Manual Rev. 1
section of this manual provides detailed instructions on how to configure
Technical
Specifications.
Safety cable
Mounting clamp
Safety
Floor mounting
Notes.
6
Advertisement
Table of Contents
