Chauvet Professional GROUND SUPPORT 2 KIT Quick Reference Manual
Hide thumbs
Also See for GROUND SUPPORT 2 KIT:
- User manual (32 pages) ,
- Quick reference manual (64 pages)
Related Manuals for Chauvet Professional GROUND SUPPORT 2 KIT
Summary of Contents for Chauvet Professional GROUND SUPPORT 2 KIT
- Page 1 GROUND SUPPORT 2 KIT Quick Reference Guide English Español Français Deutsch Nederlands...
-
Page 2: Safety Notes
QUICK REFERENCE GUIDE About This Guide The Ground Support 2 Kit Quick Reference Guide (QRG) has basic product information such as mounting diagrams and technical specifications. Disclaimer The information and specifications contained in this QRG are subject to change without notice. -
Page 3: Product Description
Product Description The Ground Support 2 Kit is a complete ground support solution for stacking F-Series Video Panels as a video wall on the floor. Multiple kits can be used to stack wider video walls. The Ground Support 2 Kit can accommodate flat and concave video walls, including a 5°... - Page 4 QUICK REFERENCE GUIDE Product Dimensions 10.24 ft 3.12 m 3.28 ft 3.28 ft Ground Support 2 Kit QRG Rev. 1...
-
Page 5: Mounting Diagram
Use the tightening nut to adjust the height of the rig bar and floor base panel. Verify they are level with the surface. Turn the locking nut on the screw jacks to secure the position. Ground Support 2 Kit QRG Rev. 1... - Page 6 Connect the ladder truss to the floor base and insert the spigots and safety clip (be sure to insert the spigots correctly). Ladder Truss Locking Spigots Repeat steps with additional floor base and connect the two floor base panels with the angling horizontal bars. Angling horizontal bars Ground Support 2 Kit QRG Rev. 1...
- Page 7 Both the F4IP and Vivid 4 have been upgraded with center mounting position frames, and may vary depending on order date. Ground Support 2 Kit QRG Rev. 1...
- Page 8 QUICK REFERENCE GUIDE Center Mount Position M12 Panel Attachment Screws Corner Mount Position M12 Panel Attachment Screws Ground Support 2 Kit QRG Rev. 1...
- Page 9 If connecting to the corner mounting position, the second locking level must be used. If using the curve kit on your video panel, use the first locking level to shorten the panel attachment arm. 11. Secure the clamp of the panel attachment arm to the ladder truss. Ground Support 2 Kit QRG Rev. 1...
- Page 10 12. Continue to stack the ladder truss and video panels for the desired video wall size. Supports walls between 4.92 ft (1.5 m) and 8.2 ft (2.5 m) wide, and as high as 9.85 ft (3 m) tall. Combine additional Ground Support 2 Kits to achieve wider walls. Ground Support 2 Kit QRG Rev. 1...
-
Page 11: Technical Specifications
9.85 ft (3 m) 4.92 ft (1.5 m) 8.2 ft (2.5 m) Note: Dimensions in inches are rounded. Ordering Product Name Item Name Item Code UPC Number Ground Support 2 Kit GROUNDSUPPORT2KIT 23091609 781462219574 Ground Support 2 Kit QRG Rev. 1... -
Page 12: Multi-Language
Voice: +52 (728) 690-2010 Visit the applicable website above to verify our contact information and instructions to request support. Outside the US, United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record. Ground Support 2 Kit QRG Rev. 1...