Dynojet POWER VISION 3 Installation Manual page 6

LOGGING DATA
The Power Vision is a powerful logging tool to diagnose running issues.
Use the Power Vision to log all vehicle operating data and review the
data in the Power Core software. Troubleshoot an issue such as knock,
speed/RPM limitation, throttle blade closure and more by keeping the
Power Vision mounted to view and record channels.
1
Press the Log button to begin logging. The Power Vision
screen will illuminate a bright red banner across the top when
logging.
2
Press the Log button again to stop logging.
3
Use the Power Core software to view log fi les.
Snapshot Log: Press and hold the Log button for two
seconds to record the previous two minutes of operating time.
DELETING DATA LOGS
This menu allows you to delete data logs.
1
Select Vehicle Tools>Delete Data Log.
2
Select a specifi c log to delete or select *Delete All Logs*.
RESET ADAPTIVES
This menu allows you to reset the learned long term
narrowband fuel trims.
Select Vehicle Tools>Reset Adaptives.
RESET IDLE TRIM
This menu allows you to reset the idle trim.
Select Vehicle Tools>Reset Idle Trim.
6 HARLEY-DAVIDSON INSTALLATION GUIDE
01:32 12.6V
Engine Speed Speed
3450 52
Gear TP
3 42.1
DATA LOG
AT_C1501TA101_PV3_SS_1.wp8
SAVED SUCCESSFULLY
VEHICLE TOOLS
DELETE DATA LOGS
RESTORE ECU
RESET ADAPTIVES
VEHICLE TOOLS
RESTORE ECU
RESET ADAPTIVES
RESET IDLE TRIM
IPV3-15-02