Table of Contents
Advertisement
Figure: 8 Steps to
Install a
Paper Roll in
the V660p-A
Camera/QR
Code Reader
2
Remove any partial paper roll from the tray.
3
Loosen the glued leading edge of the new paper roll or remove the protective
strip.
4
Position the paper roll and pull the paper out through the printer door.
5
Ensure that the printer paper extends outside the printer door, then swing the
door shut until it clicks, allowing the paper to extend outside the printer door.
The V660p-A device features a primary camera boasting 5MP CMOS
autofocus and a front-facing camera equipped with 2MP CMOS fixed focus.
Additionally, it expands the functionality of countertop devices by
incorporating barcode and QR scanning capabilities.
Installation Guide
V660p-A
25
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
