Table of Contents
Advertisement
Figure: 6 Closing
Battery
Cover
Battery
Management
Initial Battery
Charging
5
Reinstall the battery cover.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends
using a grounded anti-static wrist strap.
Observez les précautions standard lors de la manipulation d'appareils sensibles
aux décharges électrostatiques. Les décharges électrostatiques peuvent
endommager cet équipement. Verifone recommande d'utiliser un bracelet
antistatique mis à la terre.
V660p-B variant supports eSIM solution.
Effective battery management is crucial for optimizing the performance and
the lifespan of your device's battery. Here are some steps for battery
management:
To perform the initial battery charging for your V660p-A device, follow these
steps:
1
After unpacking the device, connect the power pack to the unit.
2
Allow the device to charge for eight hours or until fully charged.
3
The battery in the V660p-A device is equipped with a safety circuit to
safeguard the Li-ion cells from overcharging and over-discharging. If the
battery becomes over-discharged, the safety circuit will shut down the battery,
and it must be recharged to restore operation.
Installation Guide
V660p-A
17
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
