Vortex BLADE SLOPE Product Manual page 8

Range Unit Selection
The Blade Slope laser rangefinder offers distances in yards
™
or meters. To change your range units, toggle to the Range
screen in the Menu Settings. Press the "Measure" button to
toggle between yards and meters. Press the "Menu" button
to save your desired choice.
Choose between Yards or Meters.
14
Ranging
With the Blade Slope laser rangefinder powered up,
™
position the reticle on the target object you wish to range,
then press and release the "Measure" button to get the
distance measurement. If the laser is not able to range
due to the target object's reflectivity or being too close,
you will see a display similar to that shown here. To range
a new target, simply re-aim and press the "Measure"
button again.
Range Returned
BLADE
™
SLOPE
No Range Returned
15