Advertisement
Step 3
Using a size 5 mm Allen wrench and a 10 mm wrench
remove the lock nut and bolt that holds the rear fender
onto the frame.
Step 5
Reverse the steps.
• Reposition the deck and attach with the screws that were removed in Step 1.
ATTENTION: Charge battery 8 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Using a Phillips screwdriver, remove two (2) screws that
hold the brake sensor onto the frame. Remove brake
sensor and set aside.
2
Advertisement
