Next steps
1. Install the
disk-drive
cage.
2. Install the
3.5-inch hard
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
External puck antenna
Computers that are shipped with Intel Wi-Fi 6E AX211 wireless card come with an external SMA antenna installed.
For more information about the installation procedure of external SMA antenna for your computer, see OptiPlex Antenna
Installation Guide on the documentation support page of
Graphics card
Removing the graphics card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
70
Removing and installing Customer Replaceable Units (CRUs)
drive, if applicable.
After working inside your
Before working inside your
computer.
OptiPlex Small Form Factor
computer.
Restricted - Confidential
7020.