Table of Contents
Advertisement
USER GUIDE
Cutout & Product Dimensions
PREPARE SITE
This product has been designed for either free-standing
or built-in installation. When built-in, your unit does
not require additional air space for top, sides, or rear.
However, the front grille must NOT be obstructed, and
clearance is required for an electrical connection in
the rear.
Cutout & Product Dimensions
!
Unit can NOT be installed behind a closed cabinet
door.
If you would like to align the face of the unit with
other adjacent cabinet doors, you may need to
alter the wall just behind the drain connection on
the unit to accommodate the drain.
CUTOUT DIMENSIONS
2" x 4" Mounting Board (1 ⁄ " x 3 ⁄ ") attached to
anti-tip mounting bracket
Note: If unit is installed deeper than 24" (610 mm), then
shim behind anti-tip bracket as needed
Anti-tip mounting
brackets attached
to wall studs
82 ⁄ "
(2105 mm)
to
84 ⁄ "
( 2135 mm)
73 ⁄ "
(1873 mm)
24"
(610 mm)
29
⁄ "
(752 mm)
8
CAUTION
Electrical
Outlet
Location
4"
(102 mm)
Advertisement
Table of Contents
Troubleshooting
