USER GUIDE
Grille Installation
REMOVING AND INSTALLING GRILLE
Removing grille
1.
Loosen the two outside screws (1) enough to allow the
lower grille panel (solid) to slide into the upper grille
panel (louvered).
2.
Slide the lower grille panel upward and tighten the two
screws just enough to hold it in place.
3.
Remove the two inside screws (2).
4.
Remove grille assembly.
Upper Panel
Screws and slots
for adjustments
Installing the grille
1.
Position the grille assembly along the front edge of the
unit.
2.
Align the holes on both ends of the top panel with the
holes in the base of the unit.
3.
Attach the grille to the unit on each side with the two
philips-head screws.
4.
Adjust the bottom panel to the desired height and
fasten in place by tightening the screws in the
slots. There is approximately 1" (2.5 cm) of vertical
adjustment on the grille.
Grille Installation
Lower Panel
2
1
12