Cutout Dimensions (Professional/Custom); Cabinet Information (Professional) - Viking FDWB301R Installation Instructions Manual

Cutout Dimensions
2" x 4" Mounting Board [1-1/2" (3.8 cm) x 3-1/2" (8.9 cm)]
Attached to anti-tip mounting bracket
Note: If unit is installed deeper than 24" (61.0 cm), then
shim behind anti-tip bracket thickness by the same amount
1-1/2" 1-1/2" 1-1/2"
(3.8 cm) (3.8 cm) (3.8 cm)
3-1/2"
(8.9 cm)
8-1/4"
(20.9 cm)
Anti-tip mounting
brackets attached
to wall studs
84-1/16" (213.5 cm) max.
anti-tip board and opening
height
to
82-7/8" (210.5 cm) min.
anti-tip board and opening
height
73-3/4"
(187.3 cm)
24" (61.0 cm) Professional
25" (63.5 cm) Custom Panel*
29-5/8" (75.2 cm) Standard Mount
30" (76.2 cm) Flush Mount Only
8
(Professional/Custom)
Electrical
outlet
location
4"
(10.2 cm)
*
Custom Panel models fit flush in 25"
(63.5 cm) deep cabinet openings.
They can be installed in standard 24"
(61.0 cm) deep openings. The door
faces and top grille will protrude 3/4"
(1.9 cm) into the room.
Cabinet Information
Professional models fit "semi-flush" in standard 24" (61.0 cm) deep cabinet openings. The door
face protrudes 2-1/16" (5.2 cm) from the cabinet face. The handle protrudes an additional 2-1/2"
(6.4 cm) into the room.
3/4"
(1.9 cm)
full end
panel
24"
(61.0 cm)
standard
TOP VIEW
cabinet
depth
2-1/16"
5/16"
(5.2 cm)
(0.8 cm)
offset
(Professional)
Wall
1-13/16"
(4.6 cm)
Door
9