Table of Contents
Advertisement
USER GUIDE
First Use
INITIAL STARTUP
Initial startup requires no adjustments. When plugged
in, the unit will begin operating under the factory default
settings. If the unit was turned off during installation,
simply press
and the unit will immediately switch on. To
turn the unit off, press
.
Note: Temperature displayed reflects actual temperature
inside the unit. If the temperature displayed is different
than selected, the unit is progressing towards the selected
temperature. Time to reach set point varies based
upon ambient temperature of the product loaded, door
openings, etc. It is recommended that the unit is allowed
to reach its set points before loading product.
First Use
14
Advertisement
Table of Contents
Troubleshooting
