Viking VCWD630-SG41A User Manual & Service Manual page 35

USER GUIDE
14. VIEW ERROR LOG
A list of errors in the order they occurred will
scroll on the display. All errors are logged in
memory. Only door error is displayed on the
display and has an audible signal.
E1: Thermistor 1 open.
E2: Thermistor 2 open.
E3: Thermistor 3 open.
E4: Thermistor 4 open.
E5: Thermistor 1 shorted.
E6: Thermistor 2 shorted.
E7: Thermistor 3 shorted.
E8: Thermistor 4 shorted.
E9: Door open error.
15. CLEAR ERROR LOG
To clear errors, press and hold
when CLR is flashing.
16. THERMISTOR - 1 DIFFERENTIAL
This number should not be adjusted
17. THERMISTOR - 3 DIFFERENTIAL
This number should not be adjusted
18. SHOULD NOT BE ADJUSTED
19. SHOULD NOT BE ADJUSTED
20. INDIVIDUAL COMPONENT TOGGLE
Display #
- Option #0 – Exit
- Option #1 – Relay 1
- Option #2 – Relay 2
- Option #3 – Relay 3
- Option #4 – Relay 4
- Option #5 – Relay 5
- Option #6 – Relay 6
- Option #7 – DC Output 1
- Option #8 – DC Output 2
- Option #9 – DC Output 3
- Option #10 – DC Output 4
- Option #11 – DC Output 5
- Option #12 – Serial output (Compressor)
SEE RELAY / OUTPUT CHART
21. MODEL NUMBER INDICATOR
Displays the two-digit model number of the
specific unit.
22. LIGHT ALL LED SEGMENTS
23. ACTIVATE DEFROST / HARVEST
24. FACTORY DEFAULTS
-Press and hold for 3 seconds to restore all
values to factory defaults.
Control Operation-Service
(5 seconds)
Relay / Output
25. MAIN SOFTWARE
26. Does not apply to this model.
27. FACTORY TEST MODEL
0 = OFF, 1 = ON
28. COMPRESSOR RPM
29. DOES NOT APPLY TO THIS UNIT
30. DOES NOT APPLY TO THIS UNIT
31. DOES NOT APPLY TO THIS UNIT
32. DOES NOT APPLY TO THIS UNIT
35