ADF Web HD67969-B2-IA User Manual page 25

Industrial Electronic Devices
Note:
When you receive the device, for the first time, you also have to update the Firmware in the HD67969 device.
Warning:
If Fig. 8 appears when you try to do the Update try these points before seeking
assistance:
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
Check the LAN settings;
If you are using the program inside a Virtual Machine, try to use in the main Operating
System;
If you are using Windows Seven, Vista, 8, 10 or 11 make sure that you have the
administrator privileges;
In case you have to program more than one device, using the "UDP Update", you have
to cancel the ARP table every time you connect a new device on Ethernet. For do this
you have to launch the "Command Prompt" and write the command "arp -d". Pay
attention that with Windows Vista, Seven, 8, 10 or 11 you have to launch the
"Command Prompt" with Administrator Rights;
Pay attention at Firewall lock.
Warning:
In the case of HD67969 you have to use the software "SW67969": www.adfweb.com\download\filefold\SW67969.zip.
ADFweb.com S.r.l.
User Manual IO-Link Slave / DeviceNet Master
Document code: MN67969_ENG Revision 1.000
Figure 8: "Error" window
Page 25 of 29