Summary of Contents for NXP Semiconductors TEA2376DK1011
Page 1
Rev. 1 — 6 February 2024 User manual Document information Information Content Keywords TEA2376, PFC, interleaved, controller, converter, programmable settings, I C, TEA2376DB1514, RDK01DB1563, programming kit, quick start guide Abstract This user manual describes how to get started with the TEA2376DK1011 programming kit.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples 1 Important notice IMPORTANT NOTICE For engineering development or evaluation purposes only NXP provides the product under the following conditions: This evaluation kit or reference design is for use of ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples 2 Safety warnings 2.1 Open-framed, unenclosed PCB This user manual describes the operation of the TEA2376DB1604. The TEA2376DB1604 is provided as an open-framed, unenclosed printed-circuit board (PCB) assembly. • Use of the TEA2376DB1604 is only intended for development laboratory environments. Only qualified professionals with training, expertise, and knowledge of electrical safety risks in the development and application of high-voltage electrical circuits must use the TEA2376DB1604.
This product shall never be operated unattended. The TEA2376DK1011 programming kit includes the TEA2376DT interleaved PFC controller ICs and aTEA2376DB1604v3 programming board. The TEA2376 is a digital configurable two-phase interleaved PFC controller for high-efficiency power supplies.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples 3.1 Kit content Figure 1. TEA2376DB1604v3 programming board (with SO10 and SO14 socket) Figure 2. 20 TEA2376DT samples and a TEA2376DB1604v3 programming board UM12004 All information provided in this document is subject to legal disclaimers.
In the SO14 TEA2376DT version, the SDA and SCL connections are available on separate pins for I communication during operation. This type is very suitable for development work because the settings can be modified "on the fly" in a power supply application (see the TEA2376DK1011 programming board and IC samples (Ref.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples Working with the Ringo software is described in UM12042 TEA2376 Ringo user manual (Ref. Figure 4. Setup for programming with the Ringo software on a PC The I C-USB interface with cables (the RDK01DB1563 kit) can be used for several other recent NXP power conversion controller ICs, which have settings in MTP.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples 5 Frequently asked questions 5.1 Ringo software Q: Ringo.exe does not start. • A1: To enable Ringo software to work, the USB-I2C interface driver (FT232) must be installed on the computer.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples 5.3 Programming board Q: Which cable do I connect when I want to work with the programming board? • A1: Connect the 3-pin and the 6-pin cables and select the correct I C channel for communication.
7 References UM12002 user manual — TEA2376DK1011 programming board and IC samples; 2024, NXP Semiconductors UM12042 user manual — TEA2376 Ringo GUI; 2024, NXP Semiconductors UM12004 All information provided in this document is subject to legal disclaimers.
UM12004 NXP Semiconductors TEA2376DK1011 programming board and IC samples 8 Revision history Table 2. Revision history Document ID Release date Description UM12004 v.1.0 06 February 2024 • Initial version UM12004 All information provided in this document is subject to legal disclaimers.
NXP Semiconductors. In the event that customer uses the product for design-in and use in In no event shall NXP Semiconductors be liable for any indirect, incidental, automotive applications to automotive specifications and standards, punitive, special or consequential damages (including - without limitation - customer (a) shall use the product without NXP Semiconductors’...
Need help?
Do you have a question about the TEA2376DK1011 and is the answer not in the manual?
Questions and answers