Table of Contents
Advertisement
Special functions
Selecting special functions
Press button i and as soon as MENU
--—>
E
is indicated in
the picture, press immediately button E.
The picture shows the table.
BLAUPUNKT
IMER.
0
GB-I-NL-P-S-SF-D>
SPECIAL
FUNCTION
Av
E
i
By pressing button A or V move the yellow marking to the
line SPECIAL FUNCTION.
Press button E and the display field will be indicated.
SPECIAL
FUNCTION
PROG.
1-9. 1-49.
OSD
ON
OFF
PROG.
J
HP
The yellow marking is in the line PROG.
1-9
1-49.
-37-
PROG.
1-9
1-49
If you do not receive more than 9 programmes, you can switch
over to 1-9.
With this, the programme site number indicated when selecting
the programme sites 1, 2, 3 or 4 would immediately be indica-
ted in the unit digit and not in the decimal digit.
Press button E. 1 - 49 changes from blue to red.
Press button < or >. Now 1 - 9 becomes red.
Press button E and 1 - 9 becomes blue again. In this way this
mode is switched over.
To activate 1 - 49 again, proceed as described.
By pressing button i twice, you switch off the activated dis-
play field.
OSD
ON
OFF
You may switch off the indication which is shown in the pic-
ture when modifying the volume, the brightness, the contrast
or the colour intensity.
By pressing button A or V move the yellow marking to the
line OSD
ON
OFF.
Press button E. ON changes from blue to red.
Press button >. Now OFF becomes red.
Press button E. OFF is blue again and the indication is deac-
tivated.
To switch the indication on again, switch over to ONas de-
scribed.
By pressing button i twice, you switch off the activated dis-
play field.
PROG.
=<)
HP
By pressing button A or V move the yellow marking to the
line PROG.
<<
HP.
<1 - Volume
Press button E. The symbol <<] becomes red.
Press button E again.
Modify the volume by pressing button < or > according to
your demands and store the adjustment by pressing Etwiice.
HP — Programmer HTP 89
This special function is only for the specialized dealer.
With this operating mode the TV set can be programmed cising
the programmer HTP 89.
Press button E. The symbol! <<] becomes red.
Press button >. Now HP becomes red.
Press button E. The picture of the current TV programmedd isap-
pears.
Now the programmer can be started.
As soon as all data have been transferred, the TV s¢ zauto-
matically switches over to TV operation.
Advertisement
Table of Contents
