Table of Contents
Advertisement
ep
Headphones
Stereo headphones can be connected to jack 7? (impedance
4...600 Ohms).
The headphones must be provided with a CINCH stereo con-
nector of 3.5 mm @.
You can adjust the volume of the headphones by pressing
button AUX. Then use button < or > to change the volume.
To store the adjusted volume, press button E twice, while the
indication is still shown in the picture.
The speakers can be switched off.
Press button &.
By pressing button #8 once again the speakers can be swit-
ched on again.
If programmes are transmitted in two-channel sound, you can
listen to sound channel B via the headphones while channel A
is transmitted via the speakers and vice versa.
Press button #8 and as soon as AUDIO -->
E is indicated
in the picture; press button E.
By pressing button A or V move the yellow marking to the
line MONO
A
B.
Press button AUX and the symbol oO is indicated in this line.
bd
sod
'MONO A'BOO
eG
&
TREBLE
5:
BASS
K\4
BALANCE
Using button E you may now switch over the sound channel in
the headphones.
Press button i and the indicated display field disappears.
- 35 -
ENGLISH
Advertisement
Table of Contents
