Raising/Lowering The Vehicle; Driver Messages - Audi A6 2015 Owner's Manual

102 Aud i drive select
Adjusting the Individual mode
You can adjust the vehicle settings to your personal preferences .
• Se lect :
I CAR !
function button > Set individu-
al control button. You can now adjust the in-
dividual systems.
The Individual dr iving mode will automatica l-
ly be activated when you have finished config-
uring the settings .
Systems Comfort
Engine/ Transmission
balanced
Air suspension* comfortable
Steering
comfortable
The equipment in your vehicle will determine
which settings you can adjust. The following
table provides an overview of the characteris-
tics of each driving mode.
Auto Dynamic
ba lanced sporty
balanced sporty
balanced sporty
Dynamic steering* comfortable/indirect balanced/direct sporty direct
Sport differential *
balanced agile sporty
Adaptive cruise control* comfortable balanced
sporty
Engine sound*
subtle
subtle/sportya> sporty
al
Subtle in t he driving posit ion
D
and sporty in t he driving positio n S.
Your Individual mode settings are auto-
matically stored and assigned to the re-
mote control key be ing used.
Raising/lowering the
vehicle
Appl ies to vehicles: wit h adapt ive air suspension
Raising the vehicle
You can ra ise your veh icle temporarily, for ex-
ample to dr ive over a tall curb .
• Select the following in the MMI:
ICAR I
func-
t ion button > Raise control button.
• Wait for the arrows in the display to stop
blinking and the vehicle to reach its fina l po-
sit ion .
Lowering the vehicle
• To lower the veh icle, select the following in
the MMI:
!CARI
function button > Lower con-
tro l button.
• Wait for the arrows in the display to stop
blinking and the vehicle to lower complete-
ly.
(D
Note
- Remember that your vehicle is not suita-
ble for dr iving offroad even when it is
raised. There is not enough ground clear-
ance.
- If the vehicle is raised, it wi ll lower auto-
matically when driving 62 mph (100 km/
h) or faster.
Driver messages
Air suspension: vehicle currently too low.
Level control running
Air suspension: vehicle currently too high.
Level control running
The driver message switches off when the lev-
el control process is complete .