Table of Contents
Advertisement
Fuel range
The estimated cruising range in miles (km)
appears in the display. This tells you how far
your vehicle wi ll be able to travel on the cur-
rent tank of fue l and with the same driving
style. The disp lay changes in increments of 6
miles (10 km).
Average fuel mileage
The average fuel economy in MPG (l/100 km)
since you last cleared the memory appears in
this display. You can use this disp lay to adjust
your driving technique to achieve a desired
mileage.
Current fuel mileage
The instantaneous fuel consumption in miles
per gallon (l/100 km) is shown in this disp lay.
You can use this display to adjust your driving
technique to achieve a desired mileage.
Fuel consumption is recalculated at interva ls
of 33 yards (30 meters) . This display switches
to gallons/hour (liters/hour) when the vehicle
is not moving.
Average speed
The average speed in mph (km/h) since the
last time the disp lay was reset appears in the
disp lay.
Elapsed time
The leng t h of time that you have been driving
since you last reset the memory appears in
this display.
Distance
The distance that has been covered since the
last time the memory was cleared appears in
the disp lay.
- Fuel consumptions (average and cur-
rent), range and speed are displayed in
metric units on Canadian models.
- All stored val ues will be lost if the veh i-
cle battery is disconnected.
Driver
information
display
23
Memories
The trip computer is equipped with two fully
automatic memories as well as on efficiency
program* .
Fig. 16
Trip comput er disp lay: m emory leve l 1
You can switch between the trip computer 1
and 2 and the efficiency program* by pressing
the
I
RESET
I
button @ ¢
page 24, fig. 17 .
You can tell wh ich memory level is currently
active by the numbe r or the sign in the display
¢ fig. 16 .
The data from the single-trip mem-
ory (memory level 1) is being displayed if a
0
appears in the display. If a
tJ
is shown, then
the data from the total-trip memory is being
displayed (memory level 2). The fuel pump
nozzle
iii
indicates the efficiency program*
¢ page 24 .
Single-trip memory (Trip computer 1)
The single-trip memory stores the trip infor-
mation from the time the ign ition is turned on
until it is turned off. If the tr ip is cont inued
within 2 hours from the time the ign ition was
turned off, the new data will be included in
the calculat ion of the current trip informa-
tion. If the trip is interrupted fo r more than 2
hours the memory is reset automatically.
Total-trip memory (Trip computer 2)
Unlike the single-trip memory, the total-trip
memo ry is not reset automat ically. This per-
mits you to evaluate you r driv ing data for the
enti re period between manual resets.
Efficiency program*
The efficiency program can help you to use
less fuel ¢
page 24.
Advertisement
Table of Contents
