Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Almost Heaven Saunas Vision Series
Summary of Contents for Almost Heaven Saunas Vision Series
- Page 1 Vision Series Sauna Installation & Owner’s Manual Spectacle Serena Oasis Titan...
-
Page 2: Important Safety Instructions
• Do not throw excessive amounts of water on the stones. The evaporating water is boiling hot and could cause burns. • Do not throw water directly onto the elements. This could cause burns and damage to the heater. page 2 VISION SERIES SAUNA INSTALLATION MANUAL... - Page 3 888-355-3050, or email sales@almostheaven.com. Regular business hours are 9-5 EST, M-F. Your Vision Series Indoor Sauna is specifically designed to utilize your existing floor. As such, assembly is made very simple since the entire sauna sits on pre-fabricated rails and risers. Your sauna can be assembled on any surface that is firm and flat, including concrete, ceramic, vinyl, laminate or tile.
- Page 4 (4). Find the long inside trim piece, it should be approximately the length between your two marks. Place the trim piece between the marks and flush with the top of the panel. Fasten trim using three 1-5/8” screws (5). Ensure the panels are tight together before you fasten the trim. page 4 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 5 Repeat this process for the lower bench, push the bench back so it sits up against the pre-installed lower bench supports. Fasten the lower bench to the bench braces using 2” screws (15). This step is not applicable to the Spectacle. page 5 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 6 Fasten to the sauna wall using predrilled holes (23). Now adjust the height on the bottom of the support leg by turning the bottom until it touches the floor, and the bench is level (24). Image 20 Image 21 Image 22 page 6 Image 23 Image 24 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 7 (32). Center the panels all the way around the sauna. They should nearly match the wall panels all the way around. Once the ceiling is centered, fasten the ceiling panels to the walls using all the predrilled holes (33). page 7 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 8 (41), and plug in the supply to an outlet. You are able to turn on the LED light and adjust its brightness from within the sauna using the control mounted to the side of the backrest (42). Image 36 Image 37 Image 38 Image 39 Image 40 Image 41 Image 42 page 8 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 9 Repeat for the bottom handles (52). Now fully tighten both screws until the handles are tight (53). page 9 Image 49 Image 50 Image 51 Image 52 Image 53 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 10 See below for finished heater fence (59). To install heater fence into sauna, use the four predrilled holes and screws from sauna hardware kit (60-61). Place fence around heater and fasten into side panel (62). Image 57 Image 58 Image 59 Image 60 Image 61 Image 62 page 10 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 11 • Prepare to feel refreshed for the day or to have an amazing night’s sleep! Whatever your sauna routine, it is imperative that you STAY HYDRATED! page 11 VISION SERIES SAUNA INSTALLATION MANUAL...
- Page 12 ® almostheaven.com 03-2024...
Need help?
Do you have a question about the Vision Series and is the answer not in the manual?
Questions and answers