Almost Heaven Saunas Radiant Series Installation & Owner's Manual

Almost Heaven Saunas Radiant Series Installation & Owner's Manual

Infrared sauna

Advertisement

Radiant Series Infrared
Sauna Installation &
Owner's Manual
April 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Radiant Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Almost Heaven Saunas Radiant Series

  • Page 1 Radiant Series Infrared Sauna Installation & Owner’s Manual April 2016...
  • Page 2 Read this entire manual through to the end before beginning assembly. Thank you for your purchase of your Radiant Series Infrared Sauna. Should you have any questions during assembly, please feel free to give us a call at 888.355.3050, or e-mail sales@almostheaven.com. (Regular business hours 9-5 EST, M-F.) This manual applies to the LX1, LX2, and LX3 infrared sauna models.
  • Page 3 Roof Panel Support edge 1. Lay out All Sauna Components Package includes Floor Panel, multiple Wall Panels, pre- assembled Bench Sections, Roof Panel with Dust Cover, and Top Front Plate. Make sure that the Wall Panels are right side up. The top of each panel is distinguished by the Roof Panel Support edge;...
  • Page 4 6. Install the Bench The Bench comes in two portions: the Front Bench Section and the Top Bench Section. Insert the Front Bench Section 7c. Install the Roof Panel into the notch in the Left and Right Panels to hold it in place. Connect the power supply for the lower carbon fiber heating Position the Roof Panel so that it’s resting on the Roof Panel panel pre-installed on the Front Bench Section.
  • Page 5: Control Panel

    10. Connect to Power Source 9. Install Screw Covers (optional) Your sauna plugs directly into a 110V, 20 Amp dedicated Use a hammer to tap the provided screw covers into the pre- drilled holes in the Wall Panels to give the sauna a seamless outlet.
  • Page 6: Overheating Protection

    LIGHT CONTROL Press the LIGHT button to turn on both the interior light Press the AUDIO button until you see USB function in the and the therapy light. To operate just one of either the temperature display. Plug in your device with a USB cable interior light or therapy light, press the LIGHT button for 5 to play music through the sauna sound system.

This manual is also suitable for:

Lx1Lx2Lx3

Table of Contents