®
POWER WAVE
S350
CASE COVER REMOVAL AND REPLACEMENT AND
DC LINK CAPACITOR DISCHARGE PROCEDURE
REPLACEMENT PROCEDURE
1. Carefully position the roof onto the top of the machine.
2. Using a 5/16" nutdriver, attach the two screws securing the roof to
the machine.
3. Carefully position each handle onto the top of the machine.
4. Using a 7/16" nutdriver, attach the four screws and washers
securing each handle to the machine (eight screws and washers
total).
5. Carefully position the right side onto the machine.
6. Using a 5/16" nutdriver, attach the four screws securing the right
case side to the machine.
7. Carefully position the left case side onto the machine.
8. Using the 5/16" nutdriver, attach the four screws securing the left
case side to the machine.
9. Carefully position the four (top) corner end caps onto the machine.
10. Using the 5/16" nutdriver, attach the three screws and flat
washers securing each of the four (top) corner end caps (twelve
screws and flat washers total) to the machine.
TROUBLESHOOTING AND REPAIR
(continued)
22