Digital Watchdog MEGApix Ai DWC-XSBE05Li User Manual page 28

Set up - Camera Set up
Day & Night Settings
1
2
3
4
5
6
Day and Night
1
• Auto: In this mode, the IR cut filter is automatically removed depending on the light condition.
• Day: In this mode, the IR cut filter is always applied to the image sensor. The sensitivity is reduced in dark
light, but better color reproduction performance is obtained.
• Night: In this mode, the IR cut filter on the image sensor is removed all the time. The sensitivity is enhanced in
the dark light condition, but the image is black and white.
• Schedule: In this mode, Day/Night mode is converted in accordance with the scheduled time.
Color Level - This level determines when the camera will change from Night mode (B/W) to Day mode (color)
2
while set to Auto. The lower the value is, the lower the lighting threshold requirement is for the transition.
B/W Level - This level determines when the camera will change from Day mode (color) to Night mode (B/W)
3
while set to Auto. The lower the value is, the lower the lighting threshold requirement is for the transition.
Transition Time - If the day/night switch is set to Auto, determine the rate at which Day/Night is converted.
4
If it is set to schedule mode, Set the time that Day/Night is converted.
IR Mode - turn the built-in IR LEDs on or off manually.
6
Click 'Apply' to save all settings.
7
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
28