Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 34

If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV, DSS or CABLE mode.
Press ACTION*
to display MENU,
Press &v
to select "SET UP VCR,"
and
press SET,
sE_ up vr.R
S_LECT :& • SET: SEI
Press &v
to select
"REMOTE WARNING," and
press SET
to set "ON" or "OFF."
• If "OFF," remote warning will not appear
when invalid key is presse&
Press ACTION twice
to return to normal screen,
on the remote and try the button again.
@) _) © /F INPUT
_ STOP
__ PAUSE/
_P _ _ , STILL
_QD_
I__ACTiON
-- SELECT
-- SET
_ _" TAPE
_ _ -- POSITION
"_ REC
| • . -. -
To find out the present tape position and amount of tape remaining.
Tape position is displayed for VHS-C type Cassettes, tapes
under 30 minute long, and some other tapes, but the
position is not correct.
i
Press TAPE POSiTiON
to detect current tape position.
DETECTING TApE pOSlTION_ "
"DETECTING TAPE POSITION" is displayed
only when a cassette is first inserted, and it
takes several seconds for correct tape
position to appear.
• The present tape position indication and
amount of tape remaining (according to
tape speed) is displayed.
• Tape remaining time display may r_ot be
precise.
Press TAPE POSITION
to return to normal screen,
This function cannot display exact amount of tape remaining for
tapes 30 minutes or less, or for tapes over 120 minutes in length.
34