Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 21

1
Insert a tape with a record tab (p. 6),
• DECK power comes on. If Auto VCR/TV (see p. 32)
is set to "OFF," press VCR/TV ca the remote to be
VCR mode.
Press CH Av, or NUMBER keys
to select the channel.
• For "LINE" input, see p. 35.
• If channel is over 100, press 100 key then press
the remaining 2 digits.
O
Press SPEED
to select the record speed (p. 4).
SP = Standard Play LP = Long Play
SLP = Super Long Play
• Speed appears on-screen and on Multi Function Display.
Press REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
• To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
• You cannot view another channel during recording.
Press STOP
to stop recording.
This video recorder, equipped with H_
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the _ mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines ere
recommended.
Remove loose or peeling
labels from tapes to prevent
tape jam.
• One Touch Recording (recording in progress),
÷ press REC repeatedly to set the recording length
÷ (3_ min. ~ 4 hours).
• DECK shuts off after the preset record length.
• Record one station, watch another,
4,- press VCPJTV on the remote
(change to TV mode),
÷ select channels at TV (recording continues).
• Select Channels at DECK (In STOP or
REC. PAUSE mode),
÷ press VCPJTV on the remote
(change to TV mode),
÷ select channels at DECK.
• Play a disc while recording a tape.
÷ insert a disc during recording,
-_ press DVD, and then press PLAY.
• It is notable to record from DVD/Video
CD to H ta _K..
• Watching one channel end recording another
is not possible when using Cable Box or
DSS Receiver.
• After 5 minutes in Pause mode, DECK stops to
protect a tape and video heads.
Record using DECK buttons
Insert a tape. /_4 Press REC
I / to start
. . recording.
_i FLmcti_ Display
• Channel.
• Press STOP/EJECT to stop.
21