Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 15

• Connecting Amplifier (5.1 ch Surround system)
Enjoy the powerful movie theater and hall-like sound available with multiple
channel audio found on DVDs by connecting an amplifier and speakers,
There are two types of connection, digital and analog.
A. Digital connection (DECK OPTICAL Digital Audio Output Connector)
When DVDs recorded in Doiby Digital or DTS are played, Dolby Digital bitstream or DTS
bitstream is output from the DECK OPTICAL Digital Audio Output Connector. When DECK
is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality
audio in your home. [An optical digital audio cable (optiona 0 is required when an optional
Dolby Digital decoder or DTS decoder is used.]
B.Analog connection (5.1 ch Analog Audio Output Connector)
Connect an amplifier with muRi-channel audio input terminals. This DECK can decode
Dolby Digital and DTS. There are no limitations on sampling frequency with this kind of
connection.
Notes on connecting an optical I_
digital audio cable (optional) /_
• Firmly connect the cable to the_
connector. ._-
Surround Surround
Speaker Speaker
[5.1 ch Surround s
Front Front
Speaker
B. Analog connection
To muRi-channel audio
input terminals
DVD/VCR DECK
(Rear)
Decoder with Dolby
Digital/1) TS processing
Subwoofer
A. Digital connection
Oflutical Digital Audio
ble (optional)
To Optical Digital Audio
input Connector
Caution for optical digital audio output connector:
• When connecting an amplifier (with an Optical Digital Input Connector) which does not
contain the Dolby Digital or DTS decoder, be sure to select "PCM" at "Dolby Digital"
and "PCM" at "dts" of the Settings for DVD Operation "Audio Output" (see p. 54).
Otherwise, any attempt to play DVDs may cause such e high level of noise that it may
be harmful to your ears and damage your speakers.
• When a Dolby Digital/DTS decoder is connected, please select "Bitstream" at "dts" or
"Dolby Digital" of the Settings for DVD Operation "Audio Output".
If "PCM" is selected, there will be stereo sound. (See p. 54.)
• Video CDs and CDs can be played as usual.
Note:
• Some DTS decoders which do not support DVD-DTS interface may not work properly with
DECK. 1 5