Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 13

[o__L"_I'_[_
• With a Cable Box (DECK_Cable Box=l_TV) • v_ewany
(including
D VD/_CR
DECK T!/
scrambled)
channel.
• Connect With Two Cable Boxes
D VD/VCR DE CK
G.T"I
I
Cable Box
• use Remote
Control to select
channels without
using Multi-brand
control feature.
• record and view
both scrambled
and unscrambled
channels if
TV additional
equipment is
added.
This connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
splitter.
record
scrambled
channels.
view a channel
other than the
one selected
for any type of
recording.
do a Timer
recording of a
channel unless
you select it on
the Cable Box.
_)Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT
or S-VIDEO mode).
_)lf your TV has COMPONENT VIDEO INPUT, connect to COMPONENT VIDEO OUT.
If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, connect to
S-VIDEO OUT.
(_When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.
_• You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHFIUHF OUT TO TV,
and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available only
from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.
• PROG functions on the remote are not available when using SWIDEO OUT and COMPONENT
Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.
• TV must have capability to accept and display a progressive scan signal to use
PROGRESSIVE mode. Consult your TV operating instructions.
DVD/VCR DECK
From DECK's
77/
AN OUTPUT
iN
13