Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 16

3
Turn TV on.
See connections (_) RF Coaxial Cable Connection and @ AV Cable Connection on page 12.
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
[DECK -_ TV]
• Go to "lnitiat Setup (Ready to Play)." (See below,)
[Cable Box ÷ DECK _>-TV], [DSS ->- DECK ÷ TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone,
• If you use a DSS Receiver, it must be turned off,
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel
and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR's output channel, please refer to °VCR's Output Channel" on page 19.
Plugging the AC Power Plug into
an AC outlet
\ I Jj
CH AUTO SET PROCEED_NG-
j
CANC_LL: $TO_ \
AUTO CLOCK SET
_ PROCEEDING
CANCEL:STOP
• Function buttons are inoperative during Initial Setup.
• To remove a cassette during Auto Set, press EJECT on
the remote or STOP/EJECT twice on the DECK.
In this case, settings must be made manually. (See p. 18.)
• Depending on conditions, Auto Clock Set may take longer
than 30 minutes. If so, press STOP to stop setup and
perform settings manually. (See p. 18.)
Continued on next page...
16