Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 19

*important: If a remote control button does not work
when pressed, press the VCR button
on the remote and try the button again.
• Time Zone Adjust
(Only when Auto Clock is set.)
1) Press AV to select
"SET CLOCK," and
press SET,
• VCR's Output
Channel
1) Press AV to select
"VCR'S OUTPUT CH,,"
and press SET,
2) Press AV to select
"TIME ZONE ADJUST,"
and press SET to
subtract or add hour(s)
as necessary.
3) Press ACTION twice.
• "TIME ZONE ADJUST"
returns to °0" if clock is
set manually.
2) Press SET.
I IF YOU PRESS ACTEON
KEY VCRS OUTPUT CH
SWITCHESTO ON 4
3) Press ACTION.
PLEASE T_NE YOUR TV TQ
CH 4
1 After 3 seconds
POWER
VCR
_ NUMBER
keys
_D (3D ACTION
(3E) (3D (3D
ADD/DLT
-- SELECT
AV<P,
-- SET
_ _ CH &IV
To add channel:
Select channel with NUMBER keys
and press ADD/DLT,
I CHANNEL O8 ADDED
To delete channel:
Select channel with CN _ or
NUMBER keys and press ADD/DLT
I CHANNEL 08 DELETED
• To Make Corrections,
repeat steps 1) ~ 3).
DECK auto adjusts clock for DST,
(p. 17.)
Spring (First Sunday in April)
DST:ON "_ Sets dock ahead one hour,
Autumn (Last Sunday in October)
DST:ON _ Turns dock hack one hour
If your area does not observe
Daylight Saving Time, select
DST:OFF.
Keep these time changes in mind
when programming DECK for
timer recordings.
19