Panasonic DOUBLEFEATURE PV-D4763S Operating Instructions Manual page 30

Search System
For each recording, an invisible index mark is placed on the tape. A program index and
infQrmetion are also included for timer recordings. These marks are used to access or
scan recordings.
i _JDE_ SE_RC_
OS_NG I-gKEYS
FORWA_G S_RC_FF
R£VERSB SEA_C_REW
EXiT _STO_
Press SEARCH*
to display SEARCH
in Stop or Play
mode, and then
press NUMBER
keys
to se{ect recording
number.
• To ca{cu{ate
number, see below.
Press FF/SLOW+
or REWISLOW- on
the remote to start
search.
2
_ND_X $EARC_
_V6RS_ SEARCH _ REW
Play begins at
search end.
To search forward
or back 1 index,
press FF/SLOW+ or
REW/SLOW- on the
remote while
screen left is
displayed (10 sec.).
• To cancel, press
PLAY or STOP.
• To Calculate Index Number
Example 1:
TO go to rec. 2 fromrec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, e_er 4 and press FF.
NOTE: J, indicates start points of each recording.
Locates end point of recording for continuity.
Press SEARCH twice
to d(sp(ay SEARCH in Stop or Play
mode.
1 PR{3C_AMENDSEARCH
SEA_C_ START FF
EXiT SEARC_
Press FFISLOW÷
on the remote to
start PROGRAM
END SEARCH.
• TO cancel, press
PLAY or STOP.
Examples of Program End Search,
Fi_LqJ
_ s_'_ _to,, En_ Point
Pres_ S_A_C_ _on
_oint
t_o_,r_ m • _ _
_'_l _ _ _ If search exceeds1
EndPoint _ ' a few secends in
IBLANK area. l
Upon locating end point,
-_ search continues 7 sec. past end point,
--_ tape rewinds to 10 sec. before end point,
-_ tape prays to end point and stops.
O
• if Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
30
. tf Program End Search is started very close to
an index mark, that mark may he skipped over.