EGO PRO X CSX5000 Manual page 8

SPECIFICATIONS
EN
Rated Voltage
Max. Chain Speed
Chain Pitch
Chain Gauge
Guide Bar Length
Saw Chain Model
Saw Chain & Guide Bar Model
Chain Oil Tank Capacity
Weight (without battery pack,
saw chain, guide bar, side
cover, oil and chain sheath)
Recommended Operating
Temperature
Recommended Storage
Temperature
Recommended Charging
Temperature
Measured sound power
level L
WA
Sound pressure level at
working position L
PA
Guaranteed sound power level
L (according to 2000/14/EC)
WA
Front
handle
Vibration a
h
Rear
handle
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
8
56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CSX5000
56V
30 m/s
8.255 mm / 0.325"
1.3 mm
50 cm
AC2035 (Recommend)
AC1635, AC1835
(Compatible)
AK2035 (Recommend)
AK1635, AK1835
(Compatible)
250 ml
4.3 kg
-15°C-40°C
-20°C-70°C
5°C-40°C
102 dB(A)
K=2.3 dB(A)
92 dB(A)
K=3 dB(A)
104 dB(A)
3.3 m/s
2
K=1.5 m/s
2
1.74 m/s
2
K=1.5 m/s
2
PACKING LIST(FIG.A1)
DESCRIPTION
KNOW YOUR CHAIN SAW (Fig. A1)
1. Saw Chain
2. Chain-kickback Brake Paddle
3. Front Handle
4. LCD Screen
5. Speed Level
6. Bluetooth Icon
7. Headlight Icon
8. Brake Icon
9. High-temperature Indicator
10. Fuel-gauge Circle
11. Load Current Level
12. Low Oil Indicator
13. Headlight/Bluetooth Button
14. Oil-feeding Button
15. Oil Output Level
16. Lock-off Button
17. Trigger Switch
18. Rear Handle
19. Chain Speed Shifter
20. Battery Release Button
21. Oil-Inspection Window
22. Oil-Tank Cap
23. Guide Bar
24. Lubricating Hole
25. Chain-tensioning Bolt
26. Side Cover
27. Lock Nuts
28. Bucking Spikes
29. LED Headlight
30. Chain Sheath
31. Multi-wrench
ASSEMBLY
ASSEMBLING/REPLACING THE BAR AND CHAIN
WARNING:
Adjust the chain-kickback brake handle
in the braking position before assembly.
1. Position the chain saw power head on its side with the
side cover facing upwards (Fig. B).
2. Remove the side cover by turning the two lock nuts
counterclockwise.
3. Turn the chain-tensioning bolt counterclockwise to
loosen the chain tension.
4. Lay the saw chain in a loop on a flat surface and
straighten any kinks (Fig. C).