Page 1
OPERATOR’S MANUAL 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW MODEL NUMBER CS1400E WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.
Page 2
4. Oil Tank Cap 3. Battery-release 7. Guide Bar Button 6. Saw Chain 5. Oil Inspection 2. Lock-off Button Window 1. Trigger Switch 8. Latch 10. Electric Contacts 12. Chain Tensioning 9. Ejection Mechanism Knob 20. Sprocket in Guide Bar Tip 11.
Page 3
Chain kickback brake handle in operating position Chain kickback brake handle in brake position Pull Push Chain Tensioning Knob Side Cover Side Cover Knob Lift the Tip of the Guide Bar Up to Check for Sag Chain Drive Links Guide Bar Groove Guide Bar Slot Tension Sprocket...
Page 4
1.3 mm Felling direction Safety retreat path Safety retreat path 45°...
Page 5
Direction of fall 50 mm Felling back cut Notch 50 mm Hinge...
This page depicts and describes safety symbols that may (cycles per second) appear on this product. Read, understand, and follow all instructions on the machine before attempting to Watt Power assemble and operate. Minutes Time 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Any power tool that cannot be moving parts. Damaged or entangled cords increase controlled with the switch is dangerous and must be the risk of electric shock. repaired. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Keep handles dry, clean, and free from oil and person using only identical replacement parts. This grease. Greasy, oily handles are slippery causing loss will ensure that the safety of the power tool is maintained. of control. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Page 9
Only use a replacement chain that is equivalent to the original chain or has been certified one. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
If situations occur which are not covered in this 5. Oil Inspection Window manual, use care and good judgment. Contact EGO 6. Saw Chain Customer Service for assistance. 7. Guide Bar GUIDE BAR 8. Latch 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
4. Place the chain drive links into the guide bar groove tight upon cooling. Check the cold tension before next use. and make the chain a loop at the back of the guide bar (Fig. J). 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
When the oil is no longer visible in the across the chain line (Fig. R). inspection window, stop use immediately and refill. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Page 13
Before felling is started, consider the natural lean of the tree, the location of larger branches and the wind direction to judge which way the tree will fall. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
REPLACING THE BAR AND CHAIN WARNING: Never touch or adjust the chain while the motor is running. The saw chain is very sharp. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Clean the chain saw thoroughly before storing. Store the chain saw indoors, in a dry place that is locked and/or inaccessible to children. ◾ Keep away from corrosive agents such as garden chemicals and de-icing salts. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Debris preventing full movement of Clean debris from external chain brake the chain kickback brake handle. mechanism. Chain brake does not engage ◾ ◾ Possible chain brake malfunction Contact EGO Customer Service. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
Page 17
◾ ◾ Chain oil tank is empty. Filling bar and chain lubricant. Bar and chain running hot and smoking ◾ ◾ Debris in guide bar groove. Clear the debris in the groove. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E...
New Zealand 0508 000 EGO (0508 000 346) any time you have questions or warranty claims. LIMITED SERVICE WARRANTY FOR FIVE YEARS from the date of original retail purchase, this EGO product is warranted against defects in material or workmanship. Defective product will receive free repair.