Table of Contents
Advertisement
Quick Links
SMART APP ONLINE
UPS SYSTEM
INSTALLATION AND OPERATION MANUAL
BPE192VL2U01
SAVE THESE INSTRUCTIONS
Please read this manual and follow the instructions for installation and operation.
©2022 Cyber Power Systems, Inc. All rights reserved.
©2022 Cyber Power Systems, Inc. All rights reserved.
1
K01-0001013-00
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CyberPower BPE192VL2U01
Summary of Contents for CyberPower BPE192VL2U01
- Page 1 SMART APP ONLINE UPS SYSTEM INSTALLATION AND OPERATION MANUAL BPE192VL2U01 SAVE THESE INSTRUCTIONS Please read this manual and follow the instructions for installation and operation. ©2022 Cyber Power Systems, Inc. All rights reserved. ©2022 Cyber Power Systems, Inc. All rights reserved.
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS PRODUCT SAFETY CAUTION To reduce the risk of fire, connect the EBM AC input to a branch circuit with 20 amperes maximum overcurrent protection in accordance with the National Electric Code, ANSI/NFPA 70. A battery can present a risk of electric shock and high short circuit current. The following precaution should be observed when working on batteries: Remove watches, rings or other metal objects. -
Page 3: Table Of Contents
TABLE OF CONTENTS SAFETY INSTRUCTIONS ..........................I Product Safety ................................... I INTRODUCTION ............................... 1 UPS Extended Battery Modules ............................1 Unpacking Procedures ................................1 What's In The Box ................................... 2 EXTENDED BATTERY MODULE INSTALLATION ..................3 Battery Module ..................................3 Connection With UPS ................................4 HARDWARE INSTALLATION ........................ -
Page 4: Introduction
INTRODUCTION UPS EXTENDED BATTERY MODULES Extended Battery Modules (EBMs) from CyberPower (BPE192VL2U01) increase battery runtimes during power outages. Each rack/tower convertible EBM uses 2U of rack space and can be installed in a tower form factor to match the UPS installation. The DC plug-and-play power connectors allow to daisy-chain additional EBMs to a UPS system. -
Page 5: What's In The Box
INTRODUCTION CONT. WHAT’S IN THE BOX ITEM CONTENT ITEM CONTENT Installation and Operation Manual Front panel Registration warranty card IEC320 C14 to IEC320 C13 Rackmount ears power cord Schuko plug to IEC320 C13 Flat head screws M5X7L power cord Pan head screws M5X8L BM Cable BMP Cable Pan head screws M5X6L... -
Page 6: Extended Battery Module Installation
BATTERY : 192V (Charge Only) AC OUTPUT BPE192VL2U01 1. BPE192VL2U01 EBM DC Input Connector Connect to the UPS or to the other Extended battery modules 2. BM Ports Connection port for built-in battery management module on UPS and Extended Battery Module. -
Page 7: Connection With Ups
EXTENDED BATTERY MODULE INSTALLATION CONT. CONNECTION WITH UPS Scenario #1: UPS with one Extended Battery Module (EBM) Plug into a wall receptacle Step 1: Turn off the DC breaker on the EBM. Step 2: Loosen the two screws to remove the battery cable retention bracket of the UPS. Step 3: Use the output cable of the EBM to connect the EBM to the UPS. - Page 8 EXTENDED BATTERY MODULE INSTALLATION CONT. CONNECTION WITH UPS CONT. Scenario #2: UPS with multiple Extended Battery Modules (EBMs) Plug into a wall receptacle Step 1: Turn off the DC breaker on the EBM. Step 2: Loosen the two screws to remove the battery cable retention bracket of the UPS. Step 3: Use the output cable of the EBM to connect the EBM to the UPS.
- Page 9 EXTENDED BATTERY MODULE INSTALLATION CONT. CONNECTION WITH UPS CONT. Step 9: Turn on the DC breaker of the 2nd EBM. Step 10: Set the EBM number to the respective setting to match the number of installed units. To do this via the LCD control panel, go to the Configuration Menu, then scroll to the EBM Number setting, select the appropriate number and Save the configuration.
-
Page 10: Hardware Installation
HARDWARE INSTALLATION CyberPower Extended Battery Module (EBM) can be installed in a rackmount or vertical/tower orientation. This versatility is especially important to growing organizations with changing needs that value having the option to position an EBM on the floor or in a rackmount system. Note that the included rack mounting hardware is only compatible with square hole racks. - Page 11 HARDWARE INSTALLATION CONT. RACKMOUNT INSTALLATION FOR 4-POST RACK CONT. Rack mount ear position 4 position 4 position 1 Rack mount rail position 1 position 5 position 2 Step 5: Place and secure the EBM on the rails Slide the hanging brackets on the EBM on to the rails mounted in the rack with the front of the unit facing toward you.
-
Page 12: Vertical/Tower Installation
HARDWARE INSTALLATION CONT. VERTICAL/TOWER INSTALLATION Step 1: Adhere rubber pads Adhere four circular rubber pads to the left hand side of the extended battery module. This will become the bottom side. Insert the dust covers into the open screw holes on bottom. Step 2: Attach the base stands and attach the dust covers Stand the EBM on its side with the rubber pads facing down. -
Page 13: Maintenance
Please refer to the front side of the EBM for the model number of the correct replacement batteries. For battery procurement, go to www.cyberpower.com, or contact your local dealer. When the UPS LCD displays Service Battery, use PowerPanel® Business software or log on to the RMCARD to perform a runtime calibration to verify battery capacity is sufficient and acceptable. - Page 14 MAINTENANCE CONT. Battery Disposal Do Not Discard Batteries are considered hazardous waste and must be disposed of properly. Contact your local government for more information about proper disposal and recycling of batteries. Do not dispose of batteries in fire. Cyber Power Systems encourages environmentally sound methods for disposal and recycling of its UPS products.
- Page 15 MAINTENANCE CONT. BATTERY REPLACEMENT CONT. Step 4: Unscrew the battery retention bracket and then open it Step 5: Pull the battery trays out slowly and then put the new battery trays into the compartment. Step 6 : Assemble battery retention cover. Connect battery management module connector and then connect the battery connector.
- Page 16 TECHNICAL SPECIFICATIONS MODELS BPE192VL2U01 CONFIGURATION AC Input Voltage 200-240 V DC Output Voltage 192 Vdc DC Output Current 60 A PHYSICAL Dimensions L x W x H = 28.3 X 17.05 x 3.4 in (72 x 43.3 x 8.65 cm) Net Weight 101.4 lb (46Kg)
- Page 17 LCD control panel on the UPS (See LCD Configuration Settings). FAULT Over Charge Battery is overcharged. Remove the battery connector and check charger voltage. Contact CyberPower for repair. Charger Failure Charger has failed. ©2022 Cyber Power Systems, Inc. All rights reserved.
- Page 18 Cyber Power Systems, Inc. | www.cyberpower.com Copyright © 2022 Cyber Power Systems, Inc. All rights reserved. CyberPower and the CyberPower logo are trademarks of Cyber Power Systems, Inc., and/ or affiliates, which are registered in many countries and regions. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the BPE192VL2U01 and is the answer not in the manual?
Questions and answers