ZyXEL Communications V300-T1 Quick Start Manual page 9

6 Press to configure the new IP address. Use
PHONEBOOK to clear the default setting
(0.0.0.0) and enter the new IP address and
press again.
7 Scroll down and set up the Gateway IP
address, Subnet Mask and 1st and 2nd DNS
servers (if you have information about only one
DNS server, set up the 1st DNS only).
Enter the information exactly as provided by your ISP.
You have finished setting up your network connection. Now go to section 2.2.
2.1.3 Get an IP Address Automatically
The V300 is set to get an IP address automatically by default.
1 If you have neither a username and password
nor an IP address to use, press 3 in the Adv
Setting menu. DHCP allows your V300 to get
an IP address automatically.
2 Press to access the menu.
3 If the screen displays Off, press
If the screen displays On, your V300 is already
set to get an IP address automatically. You do not
need to change anything - go to section 2.2.
You have finished setting up your network connection. Go to section 2.2.
2.2 Set up Your Voice Account
Follow these steps to configure your VoIP account.
1 Go to the main screen (see section 2.1).
V300 Quick Start Guide
.
8
2. IP Address
0.0.0.0_
3. Gateway
0.0.0.0
4. Setting
3. DHCP (Off)
1. DHCP
Off
1. DHCP
On
1