UNITED OFFICE ULG 350 B1 Operating Instructions Manual page 56

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 47
NOTICE
Only after hot lamination: When the finished laminated pouch is
ejected from the pouch ejector slot
easily change its shape. For this reason, let the laminated pouch cool for
one minute before touching it.
To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object. This will
give it a smooth and flawless surface.
If you do not wish to start another laminating procedure, move the On/Off
switch
position.
Disconnect the plug from the mains power socket.
Anti-blocking function
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
Turn the anti-blocking switch
be drawn in.
Remove the pouch and turn the anti-blocking switch
pouch thickness.
Re-start the lamination process.
Cleaning
DANGER
Risk of potentially fatal electrical shock!
Remove the plug from the mains power socket before beginning to clean
the appliance.
Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance
Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing.
Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent.
GB │ MT
52 
5
to "OFF" and rotate the pouch thickness switch
4
of the laminator, it is hot and can
to the position ABS. The pouch will no longer
4
4
to the ABS
back to the desired
ULG 350 B1

Advertisement

Table of Contents
loading

This manual is also suitable for:

304615

Table of Contents