Mvr Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R
Use these commands to configure Multicast VLAN Registration (MVR).
39.1 Command Summary
The following section lists the commands for this feature.
Table 91 mvr Command Summary
COMMAND
show mvr
show mvr <vlan-id>
mvr <vlan-id>
8021p-priority <0-7>
inactive
no inactive
mode <dynamic|compatible>
name <name>
receiver-port <port-list>
no receiver-port <port-list> Disables the receiver port(s).An MVR receiver port can only
source-port <port-list>
no source-port <port-list>
tagged <port-list>
no tagged <port-list>
group <name> start-address
<ip> end-address <ip>
no group
no group <name-str>
no mvr <vlan-id>
Ethernet Switch CLI Reference Guide

MVR Commands

DESCRIPTION
Shows the MVR status.
Shows the detailed MVR status and MVR group configuration
for a VLAN.
Enters config-mvr mode for the specified MVR (multicast
VLAN registration). Creates the MVR, if necessary.
Sets the IEEE 802.1p priority of outgoing MVR packets.
Disables these MVR settings.
Enables these MVR settings.
Sets the MVR mode (dynamic or compatible).
Sets the MVR name for identification purposes.
name: 1-32 English keyboard characters
Sets the receiver port(s).An MVR receiver port can only
receive multicast traffic in a multicast VLAN.
receive multicast traffic in a multicast VLAN.
Sets the source port(s).An MVR source port can send and
receive multicast traffic in a multicast VLAN.
Disables the source port(s).An MVR source port can send
and receive multicast traffic in a multicast VLAN.
Sets the port(s) to tag VLAN tags.
Sets the port(s) to untag VLAN tags.
Sets the multicast group range for the MVR.
name: 1-32 English keyboard characters
Disables all MVR group settings.
Disables the specified MVR group setting.
Removes an MVR configuration of the specified VLAN from
the Switch.
39
M P
E 3
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
133