Mvr Commands; Table 86 Mvr Commands - ZyXEL Communications VES-1616F-44 User Manual

VES-1616F/1624F-44 User's Guide

32.11.5 mvr Commands

The following table lists the

Table 86 mvr Commands

COMMAND
mvr <1-
4094>
8021p-priority <0 - 7>
exit
group <name-str>
start-address <ip>
end-address <ip>
inactive
mode
<dynamic|compatible>
name <name>
no
receiver-port <port-
list>
source-port <port-
list>
tagged <port-list>
232
commands in configuration mode.
mvr
group
group <name>
inactive
receiver-port
<port-list>
source-port
<port-list>
tagged <port-
list>
DESCRIPTION
Enters the MVR (Multicast VLAN
Registration) configuration mode.
Select a priority level (0-7) with which
the switch replaces the priority in
outgoing IGMP control packets
(belonging to this multicast VLAN).
Exist from the MVR configuration
mode.
Sets the multicast group range for the
MVRMVR.
Disables MVR settings.
Sets the MVR mode.
Sets the MVR name for identification
purposes.
Disables all MVR group settings.
Disables the specified MVR group
setting.
Enables MVR.
Disables the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a multicast
VLAN
Disables the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN
Sets the port(s) to remove VLAN
tags.
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a multicast
VLAN
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN
Sets the port(s) to include VLAN tags. 13
Chapter 32 Introducing the Commands
P
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13