Mvr Commands; Table 94 Command Summary: Mvr Commands - ZyXEL Communications GS-2724 User Manual

Chapter 38 Introducing Commands
Table 93 Command Summary: config-vlan Commands (continued)
COMMAND
no
normal <port-
list>
untagged <port-
list>

38.12 mvr Commands

The following table lists the

Table 94 Command Summary: mvr Commands

COMMAND
mvr <vlan-
id>
exit
group <name-str>
start-address
<ip> end-address
<ip>
inactive
mode <dynamic|
compatible>
name <name-str>
no
260
fixed <port-list>
forbidden <port-
list>
inactive
ip address <ip-
address> <mask>
ip address default-
gateway
untagged <port-list> Specifies the port(s) you want to
commands in configuration mode.
mvr
group
group <name-str>
inactive
DESCRIPTION
Sets fixed port(s) to normal
port(s).
Sets forbidden port(s) to normal
port(s).
Enables the specified VLAN.
Deletes the IP address and
subnet mask from this VLAN.
Deletes the default gateway from
this VLAN.
tag all outgoing frames
transmitted with this VLAN
Group ID.
Specifies the port(s) to
dynamically join this VLAN group
using GVRP
Specifies the port(s) you don't
want to tag all outgoing frames
transmitted with this VLAN
Group ID.
DESCRIPTION
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
Exist from the MVR
configuration mode.
Sets the multicast group range
for the MVR.
Disables MVR settings.
Sets the MVR mode (dynamic
or compatible).
Sets the MVR name for
identification purposes.
Disables all MVR group
settings.
Disables the specified MVR
group setting.
Enables MVR.
GS-2724 User's Guide
PRIVILEG
E
13
13
13
13
13
13
13
13
PRIVILEG
E
13
13
13
13
13
13
13
13
13