Using Shortcuts And Getting Help - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

Chapter 1 How to Access and Use the CLI
1.1.3 SSH
1 Connect your computer to one of the Ethernet ports.
2 Use a SSH client program to access the Switch. If this is your first login, use the default
values in
address is in the same subnet, unless you are accessing the Switch through one or more
routers.
1.2 Logging in
Use the administrator username and password. If this is your first login, use the default values.
Table 4 Default User Name and Password
SETTING
User Name
Password
The Switch automatically logs you out of the management interface after five
minutes of inactivity. If this happens to you, simply log back in again.

1.3 Using Shortcuts and Getting Help

This table identifies some shortcuts in the CLI, as well as how to get help.
Table 5 CLI Shortcuts and Help
COMMAND / KEY(S)
history
(up/down arrow keys)
[CTRL]+U
[TAB]
?
help
12
Table 3 on page 11 and Table 4 on page
DEFAULT VALUE
admin
1234
DESCRIPTION
Displays a list of recently-used commands.
Scrolls through the list of recently-used commands. You can edit
any command or press [ENTER] to run it again.
Clears the current command.
Auto-completes the keyword you are typing if possible. For
example, type config, and press [TAB]. The Switch finishes the
word configure.
Displays the keywords and/or input values that are allowed in
place of the ?.
Displays the (full) commands that are allowed in place of help.
12. Make sure your computer IP
Ethernet Switch CLI Reference Guide