Kogan KASDA512AJA User Manual page 27

Quality of audio
played from a
connected Bluetooth
device is poor and
connection is not
stable.
No sound can be
heard or the sound
breaks (Bluetooth
mode).
The soundbar is too far
away from the Bluetooth
device.
A device emitting
electromagnetic waves
(such as a microwave oven,
a wireless device, etc.) may
be placed nearby.
The Bluetooth device that
you are using may not
support the protocol.
The connection profile
registered in the Bluetooth
device may not be
functioning correctly.
The Bluetooth reception is
poor.
The volume on the
Bluetooth device may be
too low.
Bluetooth is not selected as
the Input source.
Playback on the device has
not been performed.
The sound output on the
Bluetooth device may not
be set to this soundbar.
The connection to the
Bluetooth device was cut
off.
The soundbar may be too
far away from the
Bluetooth device.
Move the Bluetooth device
closer to the soundbar.
Do not use this product near
devices that emit
electromagnetic waves.
Use a Bluetooth device that
supports the protocol.
Delete the connection profile in
Bluetooth devices and then
connect the Bluetooth device to
this product.
Move the device closer to the
soundbar or remove any
obstacle between the device
and the soundbar.
Raise the volume on the
Bluetooth device.
Select the Bluetooth as the Input
source.
Perform playback on the device.
Select this soundbar as the
output device on the Bluetooth
device.
Connect to the Bluetooth device
again.
Move the Bluetooth device near
the soundbar.
27